Printed Circuit Board Relays, R24 Series

	Features Epoxy Sealed for Wave Soldering & Cleaning Upright (V Suffix) or Flat-Pack (FP Suffix) Types High Dielectric - 4000VRMS Between Control and Switching Circuits Cut-Off Nib After PCB Washing 94 V-0 Enclosure

Electrical Characteristics Contact
Rating Resistive Load:
10 Amp @ 380 VAC max switching (V Suffix)
10 Amp @ 250 VAC max switching (FP Suffix)
Material: Silver Cadmium Oxide (V Suffix)
Material: Sliver, Gold Flashed (FP Suffix)
Resistance: 0.3 Ohms max. initial (V Suffix)
Resistance: 0.5 Ohms max initial (FP Suffix)

Coil
Coil Voltages: See Chart
Pick-up Voltages: 80% max of nom voltage or less @ +25°C
Drop-out Voltages: 10% min of actual pull-in (min)
Resistance: See chart
Min Sensitivity: 400mW
Nominal Power: 600mW

Operational Characteristics
Timing Values:
             Operate Time: Approx 6mS (V Suffix)
             Operate Time: Approx 10mS (FP Suffix)
             Release Time: Approx 2mS (V Suffix)
             Release Time: Approx 15mS (FP Suffix)
             Max Switching Rate: 5 operations per second

Insulation Characteristics
Dielectric Strength:
             Contact to Coil: 4000 VRMS
             Across Open Contacts: 1000 VRMS

Resistance
Contact to Coil/Frame: 1000 Megohms min.
Across Open Contacts: 500 Megohms min.
Coil to Frame: 1000 Megohms min.

Environmental Characteristics
Operating: -40°C to +70°C

Life
Mechanical: 5 x 10⁶ operations min

Weight
Std: 15 grams approx.

Back to Top

Dimensional Drawings

D15a
D15b Contact Arrangment

SPDT, 1 Form "C" Upright (V Suffix)

SPDT, 1 Form "C" Flat-Pack (FP Suffix)

Back to Top

Part Numbers

DC OPERATED
NTE Type No.	Nom. Volt.	Contact Arr.	Coil Res. Ohms (Typ)	Nom. Power	Max. Contact Cur, @ 28VDC or 120VDC	Diag. No.
R24-5D10-6V	6VDC	SPDT	58	600mW	10A	D15a
R24-5D10-6FP	5/6VDC	SPDT	80	600mW	10A	D15b
R24-5D10-12V	12VDC	SPDT	215	600mW	10A	D15a
R24-5D10-12FP	12VDC	SPDT	330	600mW	10A	D15b
R24-5D10-24V	24VDC	SPDT	740	600mW	10A	D15a
R24-5D10-24FP	24VDC	SPDT	1200	600mW	10A	D15b

Back to Top